CAM6.6 Controller Release Notes

///////////////////////////////////////////////////////////////////////////////

Version: 2.00.00

Date (MM/DD/YYYY): 2/22/2006

Software Developers: 
Ian Sellon


Compiler: Raisonance RIDE IDE Version 06.10.10
          Build Number BN727-51XAST6
          8051 ToolChain 6.4.27
          XA ToolChain 2.5.26

Target:   Philips PXAG49

No of Builds: 1

Added / Deleted / Modified Features:

The software was updated to allow IR input/output using our new UEI chip.

Affected Products: Russound CAM6.6 Controller

Running Change? N/A

Known Problems / Issues:
1566   	tri   	P5   	Add win32 simulation for aux processor
2456 	enh 	P5 	naming presets on the internal source is not working prop...
2580 	enh 	P4 	Internal Source Output / Input switch not working properly
2703 	enh 	P5 	Memory Name not taking you back to the right spot once ch...
2755 	enh 	P5 	The Source Name menu does not ask you to save changes.
2800 	min 	P4 	Some commands should be recognized as a non-repeat comman...
2851 	enh 	P5 	Peripheral Devices should not respond to a POWER command ...
2867 	enh 	P5 	Peripheral Text from Internal Tuner staying on display wh...
2874 	enh 	P5 	A suggestion for improving Party Mode
2884 	enh 	P5 	should not have to cycle power after writing to device wi...
2904 	nor 	P4 	Non-active Sources can not be accessed via UNO-LRC1 remote
2946 	nor 	P4 	Numeric IR menu broken
2951 	nor 	P5 	Numeric IR menu setting "Highest #" to 0 instead of 100
3033 	nor 	P4 	Learned data returned even when learn operation fails
3051 	nor 	P4 	"Welcome" not being displayed upon Power Cycle
3067 	nor 	P4 	Non-associated numeric values display on keypad when swit...
3082 	enh 	P5 	Template types showing that should not be there.
3267 	nor 	P4 	"Test IR" should not be displayed if using "Unassigned as...
3391 	nor 	P4 	When Zone is in DND mode and set for Master in Party mode...
3413 	nor 	P4 	Party Mode still allowing Favorites to work from Non-Mast...

///////////////////////////////////////////////////////////////////////////////

///////////////////////////////////////////////////////////////////////////////

Version: 1.01.05

Date (MM/DD/YYYY): 4/06/2005

Software Developers: 
Bill Ramsdell


Compiler: Raisonance RIDE IDE Version 06.10.10
          Build Number BN727-51XAST6
          8051 ToolChain 6.4.27
          XA ToolChain 2.5.26

Target:   Philips PXAG49

No of Builds: 1

Added / Deleted / Modified Features:

Bug Fixes:
3838   	nor   	P3   	UNO-TS2 Direct Numeric Access screens not working with ne...

Affected Products: Russound CAM6.6 Controller

Running Change? N/A

Known Problems / Issues:
1566   	tri   	P5   	Add win32 simulation for aux processor
2456 	enh 	P5 	naming presets on the internal source is not working prop...
2580 	enh 	P4 	Internal Source Output / Input switch not working properly
2703 	enh 	P5 	Memory Name not taking you back to the right spot once ch...
2755 	enh 	P5 	The Source Name menu does not ask you to save changes.
2800 	min 	P4 	Some commands should be recognized as a non-repeat comman...
2851 	enh 	P5 	Peripheral Devices should not respond to a POWER command ...
2867 	enh 	P5 	Peripheral Text from Internal Tuner staying on display wh...
2874 	enh 	P5 	A suggestion for improving Party Mode
2884 	enh 	P5 	should not have to cycle power after writing to device wi...
2904 	nor 	P4 	Non-active Sources can not be accessed via UNO-LRC1 remote
2946 	nor 	P4 	Numeric IR menu broken
2951 	nor 	P5 	Numeric IR menu setting "Highest #" to 0 instead of 100
3033 	nor 	P4 	Learned data returned even when learn operation fails
3051 	nor 	P4 	"Welcome" not being displayed upon Power Cycle
3067 	nor 	P4 	Non-associated numeric values display on keypad when swit...
3082 	enh 	P5 	Template types showing that should not be there.
3267 	nor 	P4 	"Test IR" should not be displayed if using "Unassigned as...
3391 	nor 	P4 	When Zone is in DND mode and set for Master in Party mode...
3413 	nor 	P4 	Party Mode still allowing Favorites to work from Non-Mast...

///////////////////////////////////////////////////////////////////////////////

///////////////////////////////////////////////////////////////////////////////

Version: 1.01.04

Date (MM/DD/YYYY): 4/04/2005

Software Developers: 
Bill Ramsdell


Compiler: Raisonance RIDE IDE Version 06.10.10
          Build Number BN727-51XAST6
          8051 ToolChain 6.4.27
          XA ToolChain 2.5.26

Target:   Philips PXAG49

No of Builds: 1

Added / Deleted / Modified Features:

Bug Fixes:
3790   	nor   	P2   	Some RNet Raw Data codes not working properly.
2417    nor     P3      All On and All Off not being displayed properly (see bug notes)

Affected Products: Russound CAM6.6 Controller

Running Change? N/A

Known Problems / Issues:
1566   	tri   	P5   	Add win32 simulation for aux processor
2456 	enh 	P5 	naming presets on the internal source is not working prop...
2580 	enh 	P4 	Internal Source Output / Input switch not working properly
2703 	enh 	P5 	Memory Name not taking you back to the right spot once ch...
2755 	enh 	P5 	The Source Name menu does not ask you to save changes.
2800 	min 	P4 	Some commands should be recognized as a non-repeat comman...
2851 	enh 	P5 	Peripheral Devices should not respond to a POWER command ...
2867 	enh 	P5 	Peripheral Text from Internal Tuner staying on display wh...
2874 	enh 	P5 	A suggestion for improving Party Mode
2884 	enh 	P5 	should not have to cycle power after writing to device wi...
2904 	nor 	P4 	Non-active Sources can not be accessed via UNO-LRC1 remote
2946 	nor 	P4 	Numeric IR menu broken
2951 	nor 	P5 	Numeric IR menu setting "Highest #" to 0 instead of 100
3033 	nor 	P4 	Learned data returned even when learn operation fails
3051 	nor 	P4 	"Welcome" not being displayed upon Power Cycle
3067 	nor 	P4 	Non-associated numeric values display on keypad when swit...
3082 	enh 	P5 	Template types showing that should not be there.
3267 	nor 	P4 	"Test IR" should not be displayed if using "Unassigned as...
3391 	nor 	P4 	When Zone is in DND mode and set for Master in Party mode...
3413 	nor 	P4 	Party Mode still allowing Favorites to work from Non-Mast...

///////////////////////////////////////////////////////////////////////////////

///////////////////////////////////////////////////////////////////////////////

Version: 1.01.03

Date (MM/DD/YYY): 3/30/2005

Software Developers: 
Bill Ramsdell


Compiler: Raisonance RIDE IDE Version 06.10.10
          Build Number BN727-51XAST6
          8051 ToolChain 6.4.27
          XA ToolChain 2.5.26

Target:   Philips PXAG49

No of Builds: 1

Added / Deleted / Modified Features:

Bug Fixes:
3757   	nor   	P3   	ST2 display not waking up when only XM is used
Numeric IR Setup always shows max scroll number as 200.
Format Id object's get function returned wrong data.
Source select command would pack unknown keypad id when forwarding event to peripheral.

Affected Products: Russound CAM6.6 Controller

Running Change? N/A

Known Problems / Issues:
1566   	tri   	P5   	Add win32 simulation for aux processor
2456 	enh 	P5 	naming presets on the internal source is not working prop...
2580 	enh 	P4 	Internal Source Output / Input switch not working properly
2703 	enh 	P5 	Memory Name not taking you back to the right spot once ch...
2755 	enh 	P5 	The Source Name menu does not ask you to save changes.
2800 	min 	P4 	Some commands should be recognized as a non-repeat comman...
2851 	enh 	P5 	Peripheral Devices should not respond to a POWER command ...
2867 	enh 	P5 	Peripheral Text from Internal Tuner staying on display wh...
2874 	enh 	P5 	A suggestion for improving Party Mode
2884 	enh 	P5 	should not have to cycle power after writing to device wi...
2904 	nor 	P4 	Non-active Sources can not be accessed via UNO-LRC1 remote
2946 	nor 	P4 	Numeric IR menu broken
2951 	nor 	P5 	Numeric IR menu setting "Highest #" to 0 instead of 100
3033 	nor 	P4 	Learned data returned even when learn operation fails
3051 	nor 	P4 	"Welcome" not being displayed upon Power Cycle
3067 	nor 	P4 	Non-associated numeric values display on keypad when swit...
3082 	enh 	P5 	Template types showing that should not be there.
3267 	nor 	P4 	"Test IR" should not be displayed if using "Unassigned as...
3391 	nor 	P4 	When Zone is in DND mode and set for Master in Party mode...
3413 	nor 	P4 	Party Mode still allowing Favorites to work from Non-Mast...

///////////////////////////////////////////////////////////////////////////////

///////////////////////////////////////////////////////////////////////////////

Version: 1.01.02

Date (MM/DD/YYY): 3/29/2005

Software Developers: 
Bill Ramsdell


Compiler: Raisonance RIDE IDE Version 06.10.10
          Build Number BN727-51XAST6
          8051 ToolChain 6.4.27
          XA ToolChain 2.5.26

Target:   Philips PXAG49

No of Builds: 1

Added / Deleted / Modified Features:

Bug Fixes:
3618   	nor   	P3   	Learn /delete bug
3668 	nor 	P3 	Command Type Peripheral should not ask for Device Code.
3676 	nor 	P3 	Numeric IR displaying incorrectly when exceeding Max value
3702 	nor 	P3 	IR transmitting when leaving the "Cable" source screens

Affected Products: Russound CAM6.6 Controller

Running Change? N/A

Known Problems / Issues:
1566   	tri   	P5   	Add win32 simulation for aux processor
2456 	enh 	P5 	naming presets on the internal source is not working prop...
2580 	enh 	P4 	Internal Source Output / Input switch not working properly
2703 	enh 	P5 	Memory Name not taking you back to the right spot once ch...
2755 	enh 	P5 	The Source Name menu does not ask you to save changes.
2800 	min 	P4 	Some commands should be recognized as a non-repeat comman...
2851 	enh 	P5 	Peripheral Devices should not respond to a POWER command ...
2867 	enh 	P5 	Peripheral Text from Internal Tuner staying on display wh...
2874 	enh 	P5 	A suggestion for improving Party Mode
2884 	enh 	P5 	should not have to cycle power after writing to device wi...
2904 	nor 	P4 	Non-active Sources can not be accessed via UNO-LRC1 remote
2946 	nor 	P4 	Numeric IR menu broken
2951 	nor 	P5 	Numeric IR menu setting "Highest #" to 0 instead of 100
3033 	nor 	P4 	Learned data returned even when learn operation fails
3051 	nor 	P4 	"Welcome" not being displayed upon Power Cycle
3067 	nor 	P4 	Non-associated numeric values display on keypad when swit...
3082 	enh 	P5 	Template types showing that should not be there.
3267 	nor 	P4 	"Test IR" should not be displayed if using "Unassigned as...
3391 	nor 	P4 	When Zone is in DND mode and set for Master in Party mode...
3413 	nor 	P4 	Party Mode still allowing Favorites to work from Non-Mast...

///////////////////////////////////////////////////////////////////////////////

Version: 1.01.01

Date (MM/DD/YYY): 3/14/2005

Software Developers: 
Bill Ramsdell


Compiler: Raisonance RIDE IDE Version 06.10.10
          Build Number BN727-51XAST6
          8051 ToolChain 6.4.27
          XA ToolChain 2.5.26

Target:   Philips PXAG49

No of Builds: 1

Added / Deleted / Modified Features:

Bug Fixes:
3668   	nor   	P3   	Command Type Peripheral should not ask for Device Code.
3048 	nor 	P4 	"Hello" not being displayed
3346 	nor 	P4 	Numbers from IR remote are not blocked to peripheral in n...
3420 	nor 	P4 	Party Mode not working properly - Source Selection

Affected Products: Russound CAM6.6 Controller

Running Change? N/A

Known Problems / Issues:
1566   	tri   	P5   	Add win32 simulation for aux processor
2456 	enh 	P5 	naming presets on the internal source is not working prop...
2580 	enh 	P4 	Internal Source Output / Input switch not working properly
2703 	enh 	P5 	Memory Name not taking you back to the right spot once ch...
2755 	enh 	P5 	The Source Name menu does not ask you to save changes.
2800 	min 	P4 	Some commands should be recognized as a non-repeat comman...
2851 	enh 	P5 	Peripheral Devices should not respond to a POWER command ...
2867 	enh 	P5 	Peripheral Text from Internal Tuner staying on display wh...
2874 	enh 	P5 	A suggestion for improving Party Mode
2884 	enh 	P5 	should not have to cycle power after writing to device wi...
2904 	nor 	P4 	Non-active Sources can not be accessed via UNO-LRC1 remote
2946 	nor 	P4 	Numeric IR menu broken
2951 	nor 	P5 	Numeric IR menu setting "Highest #" to 0 instead of 100
3033 	nor 	P4 	Learned data returned even when learn operation fails
3051 	nor 	P4 	"Welcome" not being displayed upon Power Cycle
3067 	nor 	P4 	Non-associated numeric values display on keypad when swit...
3082 	enh 	P5 	Template types showing that should not be there.
3267 	nor 	P4 	"Test IR" should not be displayed if using "Unassigned as...
3391 	nor 	P4 	When Zone is in DND mode and set for Master in Party mode...
3413 	nor 	P4 	Party Mode still allowing Favorites to work from Non-Mast...


Version: 1.01.00

Date (MM/DD/YYY): 3/11/2005

Software Developers: 
Bill Ramsdell


Compiler: Raisonance RIDE IDE Version 06.10.10
          Build Number BN727-51XAST6
          8051 ToolChain 6.4.27
          XA ToolChain 2.5.26

Target:   Philips PXAG49

No of Builds: 1

Added / Deleted / Modified Features:

Bug Fixes:
3573   	nor   	P1   	"Factory Init." appears on the screens when it should not
3284   	nor   	P3   	Warnings in build of functions called without prototypes

Affected Products: Russound CAM6.6 Controller

Running Change? N/A

Known Problems / Issues:
1566   	tri   	P5   	Oth   	bille@russound.com   	ASSI   	  	Add win32 simulation for aux processor
2456 	enh 	P5 	PC 	bille@russound.com 	ASSI 		naming presets on the internal source is not working prop...
2580 	enh 	P4 	PC 	katyw@russound.com 	NEW 		Internal Source Output / Input switch not working properly
2703 	enh 	P5 	PC 	billram@russound.com 	ASSI 		Memory Name not taking you back to the right spot once ch...
2755 	enh 	P5 	PC 	billram@russound.com 	ASSI 		The Source Name menu does not ask you to save changes.
2800 	min 	P4 	PC 	bille@russound.com 	ASSI 		Some commands should be recognized as a non-repeat comman...
2851 	enh 	P5 	PC 	billram@russound.com 	ASSI 		Peripheral Devices should not respond to a POWER command ...
2867 	enh 	P5 	PC 	billram@russound.com 	ASSI 		Peripheral Text from Internal Tuner staying on display wh...
2874 	enh 	P5 	PC 	billram@russound.com 	ASSI 		A suggestion for improving Party Mode
2884 	enh 	P5 	PC 	billram@russound.com 	ASSI 		should not have to cycle power after writing to device wi...
2904 	nor 	P4 	PC 	bille@russound.com 	ASSI 		Non-active Sources can not be accessed via UNO-LRC1 remote
2946 	nor 	P4 	PC 	bille@russound.com 	NEW 		Numeric IR menu broken
2951 	nor 	P5 	PC 	bille@russound.com 	NEW 		Numeric IR menu setting "Highest #" to 0 instead of 100
3033 	nor 	P4 	PC 	billram@russound.com 	ASSI 		Learned data returned even when learn operation fails
3048 	nor 	P4 	PC 	billram@russound.com 	ASSI 		"Hello" not being displayed
3051 	nor 	P4 	PC 	billram@russound.com 	ASSI 		"Welcome" not being displayed upon Power Cycle
3067 	nor 	P4 	PC 	bille@russound.com 	NEW 		Non-associated numeric values display on keypad when swit...
3082 	enh 	P5 	PC 	bille@russound.com 	NEW 		Template types showing that should not be there.
3267 	nor 	P4 	PC 	bille@russound.com 	NEW 		"Test IR" should not be displayed if using "Unassigned as...
3346 	nor 	P4 	PC 	bille@russound.com 	ASSI 		Numbers from IR remote are not blocked to peripheral in n...
3391 	nor 	P4 	PC 	bille@russound.com 	NEW 		When Zone is in DND mode and set for Master in Party mode...
3413 	nor 	P4 	PC 	andyl@russound.com 	NEW 		Party Mode still allowing Favorites to work from Non-Mast...
3420 	nor 	P4 	PC 	bille@russound.com 	NEW 		Party Mode not working properly - Source Selection

///////////////////////////////////////////////////////////////////////////////

Version: 1.00.14

Date (MM/DD/YYY): 2/17/2005

Software Developers: 
Bill Ramsdell (changes)
Bob Sellon (release)

Compiler: Raisonance RIDE IDE Version 06.10.10
          Build Number BN727-51XAST6
          8051 ToolChain 6.4.27
          XA ToolChain 2.5.26

Target:   Philips PXAG49

No of Builds: 1

Added / Deleted / Modified Features:

Bug Fixes:
- Preamp problem

Affected Products: Russound CAM6.6 Controller

Running Change? N/A

Known Problems / Issues:
1566   	tri   	P5   	Oth   	bille@russound.com   	ASSI   	  	Add win32 simulation for aux processor
2456 	enh 	P5 	PC 	bille@russound.com 	ASSI 		naming presets on the internal source is not working prop...
2580 	enh 	P4 	PC 	katyw@russound.com 	NEW 		Internal Source Output / Input switch not working properly
2703 	enh 	P5 	PC 	billram@russound.com 	ASSI 		Memory Name not taking you back to the right spot once ch...
2755 	enh 	P5 	PC 	billram@russound.com 	ASSI 		The Source Name menu does not ask you to save changes.
2800 	min 	P4 	PC 	bille@russound.com 	ASSI 		Some commands should be recognized as a non-repeat comman...
2851 	enh 	P5 	PC 	billram@russound.com 	ASSI 		Peripheral Devices should not respond to a POWER command ...
2867 	enh 	P5 	PC 	billram@russound.com 	ASSI 		Peripheral Text from Internal Tuner staying on display wh...
2874 	enh 	P5 	PC 	billram@russound.com 	ASSI 		A suggestion for improving Party Mode
2884 	enh 	P5 	PC 	billram@russound.com 	ASSI 		should not have to cycle power after writing to device wi...
2904 	nor 	P4 	PC 	bille@russound.com 	ASSI 		Non-active Sources can not be accessed via UNO-LRC1 remote
2946 	nor 	P4 	PC 	bille@russound.com 	NEW 		Numeric IR menu broken
2951 	nor 	P5 	PC 	bille@russound.com 	NEW 		Numeric IR menu setting "Highest #" to 0 instead of 100
3033 	nor 	P4 	PC 	billram@russound.com 	ASSI 		Learned data returned even when learn operation fails
3048 	nor 	P4 	PC 	billram@russound.com 	ASSI 		"Hello" not being displayed
3051 	nor 	P4 	PC 	billram@russound.com 	ASSI 		"Welcome" not being displayed upon Power Cycle
3067 	nor 	P4 	PC 	bille@russound.com 	NEW 		Non-associated numeric values display on keypad when swit...
3082 	enh 	P5 	PC 	bille@russound.com 	NEW 		Template types showing that should not be there.
3267 	nor 	P4 	PC 	bille@russound.com 	NEW 		"Test IR" should not be displayed if using "Unassigned as...
3346 	nor 	P4 	PC 	bille@russound.com 	ASSI 		Numbers from IR remote are not blocked to peripheral in n...
3391 	nor 	P4 	PC 	bille@russound.com 	NEW 		When Zone is in DND mode and set for Master in Party mode...
3413 	nor 	P4 	PC 	andyl@russound.com 	NEW 		Party Mode still allowing Favorites to work from Non-Mast...
3420 	nor 	P4 	PC 	bille@russound.com 	NEW 		Party Mode not working properly - Source Selection
///////////////////////////////////////////////////////////////////////////////

Version: 1.00.13

Date (MM/DD/YYY): 2/2/2005

Software Developers: 
Bob Sellon

Compiler: Raisonance RIDE IDE Version 06.10.10
          Build Number BN727-51XAST6
          8051 ToolChain 6.4.27
          XA ToolChain 2.5.26

Target:   Philips PXAG49

No of Builds: 1

Added / Deleted / Modified Features:

Bug Fixes:

3462 - SELECT command not being sent to source
3411 - Party Mode still allowing Favorites to work from Non-Master Zones
???? - Numeric IR being sent to source even though DND or party mode enabled.

Affected Products: Russound CAM6.6 Controller

Running Change? N/A

Known Problems / Issues:

1566   	tri   	P5   	Oth   	bille@russound.com   	ASSI   	  	Add win32 simulation for aux processor
2456 	enh 	P5 	PC 	bille@russound.com 	ASSI 		naming presets on the internal source is not working prop...
2580 	enh 	P4 	PC 	katyw@russound.com 	NEW 		Internal Source Output / Input switch not working properly
2703 	enh 	P5 	PC 	billram@russound.com 	ASSI 		Memory Name not taking you back to the right spot once ch...
2755 	enh 	P5 	PC 	billram@russound.com 	ASSI 		The Source Name menu does not ask you to save changes.
2800 	min 	P4 	PC 	bille@russound.com 	ASSI 		Some commands should be recognized as a non-repeat comman...
2851 	enh 	P5 	PC 	billram@russound.com 	ASSI 		Peripheral Devices should not respond to a POWER command ...
2867 	enh 	P5 	PC 	billram@russound.com 	ASSI 		Peripheral Text from Internal Tuner staying on display wh...
2874 	enh 	P5 	PC 	billram@russound.com 	ASSI 		A suggestion for improving Party Mode
2884 	enh 	P5 	PC 	billram@russound.com 	ASSI 		should not have to cycle power after writing to device wi...
2904 	nor 	P4 	PC 	bille@russound.com 	ASSI 		Non-active Sources can not be accessed via UNO-LRC1 remote
2946 	nor 	P4 	PC 	bille@russound.com 	NEW 		Numeric IR menu broken
2951 	nor 	P5 	PC 	bille@russound.com 	NEW 		Numeric IR menu setting "Highest #" to 0 instead of 100
3033 	nor 	P4 	PC 	billram@russound.com 	ASSI 		Learned data returned even when learn operation fails
3048 	nor 	P4 	PC 	billram@russound.com 	ASSI 		"Hello" not being displayed
3051 	nor 	P4 	PC 	billram@russound.com 	ASSI 		"Welcome" not being displayed upon Power Cycle
3067 	nor 	P4 	PC 	bille@russound.com 	NEW 		Non-associated numeric values display on keypad when swit...
3082 	enh 	P5 	PC 	bille@russound.com 	NEW 		Template types showing that should not be there.
3267 	nor 	P4 	PC 	bille@russound.com 	NEW 		"Test IR" should not be displayed if using "Unassigned as...
3346 	nor 	P4 	PC 	bille@russound.com 	ASSI 		Numbers from IR remote are not blocked to peripheral in n...
3391 	nor 	P4 	PC 	bille@russound.com 	NEW 		When Zone is in DND mode and set for Master in Party mode...
3413 	nor 	P4 	PC 	andyl@russound.com 	NEW 		Party Mode still allowing Favorites to work from Non-Mast...
3420 	nor 	P4 	PC 	bille@russound.com 	NEW 		Party Mode not working properly - Source Selection

///////////////////////////////////////////////////////////////////////////////

Version: 1.00.12 (intermediate release)

Date (MM/DD/YYY): 12/30/2004

Software Developers: 
Bob Sellon

Compiler: Raisonance RIDE IDE Version 06.10.10
          Build Number BN727-51XAST6
          8051 ToolChain 6.4.27
          XA ToolChain 2.5.26

Target:   Philips PXAG49

No of Builds: 1

Added / Deleted / Modified Features:

Bug Fixes:

3335 Display messages missing from TS2 screens intermittantly


Affected Products: Russound CAM6.6 Controller

Running Change? N/A

Known Problems / Issues:

1566   	tri   	P5   	Oth   	bille@russound.com   	ASSI   	  	Add win32 simulation for aux processor
2456 	enh 	P5 	PC 	bille@russound.com 	ASSI 		naming presets on the internal source is not working prop...
2580 	enh 	P4 	PC 	katyw@russound.com 	NEW 		Internal Source Output / Input switch not working properly
2703 	enh 	P5 	PC 	billram@russound.com 	ASSI 		Memory Name not taking you back to the right spot once ch...
2755 	enh 	P5 	PC 	billram@russound.com 	ASSI 		The Source Name menu does not ask you to save changes.
2800 	min 	P4 	PC 	bille@russound.com 	ASSI 		Some commands should be recognized as a non-repeat comman...
2851 	enh 	P5 	PC 	billram@russound.com 	ASSI 		Peripheral Devices should not respond to a POWER command ...
2867 	enh 	P5 	PC 	billram@russound.com 	ASSI 		Peripheral Text from Internal Tuner staying on display wh...
2874 	enh 	P5 	PC 	billram@russound.com 	ASSI 		A suggestion for improving Party Mode
2884 	enh 	P5 	PC 	billram@russound.com 	ASSI 		should not have to cycle power after writing to device wi...
2904 	nor 	P4 	PC 	bille@russound.com 	ASSI 		Non-active Sources can not be accessed via UNO-LRC1 remote
2946 	nor 	P4 	PC 	bille@russound.com 	NEW 		Numeric IR menu broken
2951 	nor 	P5 	PC 	bille@russound.com 	NEW 		Numeric IR menu setting "Highest #" to 0 instead of 100
3033 	nor 	P4 	PC 	billram@russound.com 	ASSI 		Learned data returned even when learn operation fails
3048 	nor 	P4 	PC 	billram@russound.com 	ASSI 		"Hello" not being displayed
3051 	nor 	P4 	PC 	billram@russound.com 	ASSI 		"Welcome" not being displayed upon Power Cycle
3067 	nor 	P4 	PC 	bille@russound.com 	NEW 		Non-associated numeric values display on keypad when swit...
3082 	enh 	P5 	PC 	bille@russound.com 	NEW 		Template types showing that should not be there.
3267 	nor 	P4 	PC 	bille@russound.com 	NEW 		"Test IR" should not be displayed if using "Unassigned as...
3346 	nor 	P4 	PC 	bille@russound.com 	ASSI 		Numbers from IR remote are not blocked to peripheral in n...
3391 	nor 	P4 	PC 	bille@russound.com 	NEW 		When Zone is in DND mode and set for Master in Party mode...
3413 	nor 	P4 	PC 	andyl@russound.com 	NEW 		Party Mode still allowing Favorites to work from Non-Mast...
3420 	nor 	P4 	PC 	bille@russound.com 	NEW 		Party Mode not working properly - Source Selection

///////////////////////////////////////////////////////////////////////////////

Version: 1.00.11

Date (MM/DD/YYY): 10/19/2004

Software Developers: 
Bill Edmondson

Compiler: Raisonance RIDE IDE Version 06.10.10
          Build Number BN727-51XAST6
          8051 ToolChain 6.4.27
          XA ToolChain 2.5.26

Target:   Philips PXAG49

No of Builds: 2

Added / Deleted / Modified Features:

Bug Fixes:

2954 - When Setup button pressed while in User Menu keypad enters obscure menu that should not be accessable
2937 - Source Names not correct when writing with PCPT to multiple controllers (requested to remove this feature)

Affected Products: Russound CAM6.6 Controller

Running Change? N/A

Known Problems / Issues:

2934 	P4 	Accessing Setup Menu when not set to Controller ID #1 not responding properly
2946 	P4 	Numeric IR menu broken
2951 	P4 	Numeric IR menu setting "Highest #" to 0 instead of 100
2620 	P4 	When I have 6 controllers set up they have random numbers for the number of Controllers
2800 	P4 	Some commands should be recognized as a non-repeat command for a Press and Hold Key Config
2904 	P4 	Non-active Sources can not be accessed via UNO-LRC1 remote
1566 	P5 	Add win32 simulation for aux processor
2456 	P5 	naming presets on the internal source is not working properly.


///////////////////////////////////////////////////////////////////////////////

Version: 1.00.10

Date (MM/DD/YYY): 10/4/2004

Software Developers: 
Bill Edmondson

Compiler: Raisonance RIDE IDE Version 06.10.10
          Build Number BN727-51XAST6
          8051 ToolChain 6.4.27
          XA ToolChain 2.5.26

Target:   Philips PXAG49

No of Builds: 2

Added / Deleted / Modified Features:

Bug Fixes:

2863 - Source name for XM tuner wrong after fact init

Affected Products: Russound CAM6.6 Controller

Running Change? N/A

Known Problems / Issues:

None

///////////////////////////////////////////////////////////////////////////////

Version: 1.00.09

Date (MM/DD/YYY): 10/1/2004

Software Developers: 
Bill Edmondson

Compiler: Raisonance RIDE IDE Version 06.10.10
          Build Number BN727-51XAST6
          8051 ToolChain 6.4.27
          XA ToolChain 2.5.26

Target:   Philips PXAG49

No of Builds: 2

Added / Deleted / Modified Features:

Bug Fixes:

2863 - Source name for XM tuner wrong after fact init

Affected Products: Russound CAM6.6 Controller

Running Change? N/A

Known Problems / Issues:

None

///////////////////////////////////////////////////////////////////////////////

Version: 1.00.08

Date (MM/DD/YYY): 9/30/2004

Software Developers: 
Bill Edmondson

Compiler: Raisonance RIDE IDE Version 06.10.10
          Build Number BN727-51XAST6
          8051 ToolChain 6.4.27
          XA ToolChain 2.5.26

Target:   Philips PXAG49

No of Builds: 2

Added / Deleted / Modified Features:

Bug Fixes:

2431 - display not working correctly when saving presets on internal source.

Affected Products: Russound CAM6.6 Controller

Running Change? N/A

Known Problems / Issues:

None

///////////////////////////////////////////////////////////////////////////////

Version: 1.00.07

Date (MM/DD/YYY): 9/30/2004

Software Developers: 
Bill Edmondson

Compiler: Raisonance RIDE IDE Version 06.10.10
          Build Number BN727-51XAST6
          8051 ToolChain 6.4.27
          XA ToolChain 2.5.26

Target:   Philips PXAG49

No of Builds: 2

Added / Deleted / Modified Features:

Bug Fixes:

2090 	Fixed zone preamp outputs stays on when zone shut off
2421 	Numeric IR does not work with Peripheral devices fully
2431 	display not working correctly when saving presets on internal source.
2595 	RNET data getting corrupted when there are multiple RNET connections.
2777 	RS232 command for all on/off not working properly.
2848 	The 3rd keypad on the 1st controller acting weird.
2859 	Do Not Disturb not worknig when connect to CAV through RNET

Affected Products: Russound CAM6.6 Controller

Running Change? N/A

Known Problems / Issues:

None

///////////////////////////////////////////////////////////////////////////////

Version: 1.00.06

Date (MM/DD/YYY): 9/28/2004

Software Developers: 
Bill Edmondson

Compiler: Raisonance RIDE IDE Version 06.10.10
          Build Number BN727-51XAST6
          8051 ToolChain 6.4.27
          XA ToolChain 2.5.26

Target:   Philips PXAG49

No of Builds: 2

Added / Deleted / Modified Features:

Bug Fixes:

2795  "F1 Saved" and "F2 Saved"  not being displayed with certain sources

Affected Products: Russound CAM6.6 Controller

Running Change? N/A

Known Problems / Issues:

None

///////////////////////////////////////////////////////////////////////////////

Version: 1.00.05

Date (MM/DD/YYY): 9/27/2004

Software Developers: 
Bill Edmondson

Compiler: Raisonance RIDE IDE Version 06.10.10
          Build Number BN727-51XAST6
          8051 ToolChain 6.4.27
          XA ToolChain 2.5.26

Target:   Philips PXAG49

No of Builds: 2

Added / Deleted / Modified Features:

Bug Fixes:

2238  The XM source descriptive text is not showing when it suppose too
2239  When the keypad is turned off, it still broadcast info. On the LCD.
2243  Key pads not responding to commands 
2417  All On and All Off not being displayed properly (requires UNO-S1 for fix)
2421  Numeric IR does not work with Peripheral devices fully
2429 	display not working properly when features are disabled. ...
2456 	naming presets on the internal source is not working prop...
2595 	RNET data getting corrupted when there are multiple RNET ...
2596  Front A/V Input still accessable via UNO-LRC1.
2629 	Peripheral Setup menu locks up CAM6.6 with no internal tuner
2630  Need to change default zone and source trim levels
2692 	Internal Tuner incrementing two frequency steps at a time
2716 	Keypads not working properly after initial CAM boot up.
2753 	Volume up doesn't display on the zone when controlled by ...
2774 	RS232 protocalls background color comand not working
2777 	RS232 command for all on/off not working properly.
2792  Power command for Internal Tuner not working properly
2794 	Controlling the CAV in party mode not working properly.
2795 	"F1 Saved" and "F2 Saved" not being displayed with certa...
2796  Front A/V being displayed on keypads connected to a CAM when linked through RNET to a CAV
      "Fn Saved" (saving favorites) message sourced from controller.

Affected Products: Russound CAM6.6 Controller
                   Russound Tuner Module

Running Change? N/A

Known Problems / Issues:

None

///////////////////////////////////////////////////////////////////////////////

Version: 1.00.04

Date (MM/DD/YYY): 8/24/2004

Software Developers: 
Bill Edmondson

Compiler: Raisonance RIDE IDE Version 06.10.10
          Build Number BN727-51XAST6
          8051 ToolChain 6.4.27
          XA ToolChain 2.5.26

Target:   Philips PXAG49

No of Builds: 2

Added / Deleted / Modified Features:

Bug Fixes:

2551 	power gets automatically cycled intermittently.
2552 	Auto Play not working properly
2554  Set all source default COMMAND TYPE's to 'Peripheral'
2558  keypad turns off but still displays zone text and Zone LED stays lit.
2561  RNET connected to any Peripheral devices while programming causes data coruption
2562  Power light not operational on keypads
2563  ST-2 keypad would not power off

Affected Products: Russound CAM6.6 Controller
                   Russound Tuner Module

Running Change? N/A

Known Problems / Issues:

Priority 1/2/3:

2238  The XM source descriptive text is not showing when it suppose too
2239  When the keypad is turned off, it still broadcast info. On the LCD.
2243  Key pads not responding to commands 
2417  All On and All Off not being displayed properly
2421 	Numeric IR does not work with Peripheral devices fully
2422 	Source Select does nothing when using an SMS3 as three of...

Priority 4/5:

2429 	display not working properly when features are disabled. ...
2456 	naming presets on the internal source is not working prop...

note: Display messages may get fragmented into multiple packets (will not work with touchpad)

None

///////////////////////////////////////////////////////////////////////////////

Version: 1.00.03

Date (MM/DD/YYY): 8/19/2004

Software Developers: 
Bill Edmondson

Compiler: Raisonance RIDE IDE Version 06.10.10
          Build Number BN727-51XAST6
          8051 ToolChain 6.4.27
          XA ToolChain 2.5.26

Target:   Philips PXAG49

No of Builds: 2

Added / Deleted / Modified Features:

Bug Fixes:

2417  All On and All Off not being displayed properly
2421 	Numeric IR does not work with Peripheral devices fully
2546  Factory Init display info is inconsistant with CAV
2549  Factory init of the internal tuner
2554  Set all source default COMMAND TYPE's to 'Peripheral'


Affected Products: Russound CAM6.6 Controller
                   Russound Tuner Module

Running Change? N/A

Known Problems / Issues:

Priority 1/2/3:

2422 	Source Select does nothing when using an SMS3 as three of...
2550 	Internal Tuner not showing the correct Source Name after performing a Factory Init.
2551 	power gets automatically cycled intermittently.
2552 	Auto Play not working properly
2558  keypad turns off but still displays zone text and Zone LED stays lit.
2561  RNET connected to any Peripheral devices while programming causes data coruption
2562  Power light not operational on keypads
2563  ST-2 keypad would not power off

Priority 4/5:

2429 	display not working properly when features are disabled. ...
2456 	naming presets on the internal source is not working prop...

note: Display messages may get fragmented into multiple packets (will not work with touchpad)

None

///////////////////////////////////////////////////////////////////////////////

Version: 1.00.02

Date (MM/DD/YYY): 8/10/2004

Software Developers: 
Bill Edmondson

Compiler: Raisonance RIDE IDE Version 06.10.10
          Build Number BN727-51XAST6
          8051 ToolChain 6.4.27
          XA ToolChain 2.5.26

Target:   Philips PXAG49

No of Builds: 2

Added / Deleted / Modified Features:

Bug Fixes:

2414 	User Menu has the option to Enable "Front A/V Input"????????
2415 	display info not timed for long enough to display on keyp...
2424 	if on a higher source then the number of sources changed ...
2428 	Master Enable/Disable not working properly
2430 	Controller ID should max out at 6 but it goes to 8.
2440 	If choosing peripheral as a device for power management i...
2444 	built-in tuner not working properly with "Factory Init" u...
2455 	no programming is possible wtih the UNO-LRC1 remote control.
2492 	Move PERIPH SETUP Menu Item as first Installation Menu se...
2441 	Power Management does not work.

Affected Products: Russound CAM6.6 Controller
                   Russound Tuner Module

Running Change? N/A

Known Problems / Issues:

2421 	P2 	Numeric IR does not work with Peripheral devices fully
2422 	P2 	Source Select does nothing when using an SMS3 as three of...
2439 	P2 	entering this menu requires an additional button press.
2429 	P4 	display not working properly when features are disabled. ...
2456 	P4 	naming presets on the internal source is not working prop...

note: Display messages may get fragmented into multiple packets (will not work with touchpad)

None

///////////////////////////////////////////////////////////////////////////////

Version: 1.00.01

Date (MM/DD/YYY): 7/14/2004

Software Developers: 
Bill Edmondson

Compiler: Raisonance RIDE IDE Version 06.10.10
          Build Number BN727-51XAST6
          8051 ToolChain 6.4.27
          XA ToolChain 2.5.26

Target:   Philips PXAG49

No of Builds: 2

Added / Deleted / Modified Features:

Bug Fixes:

* Favorites passed to peripheral. Controller no handles display in this case.
* Multicontroller issues when accessing Tuner Module (respond to all or specific)
* changed page enable to mute enable
* added support for sending strings from CAM so that UNO upgrade is not needed
   (note that both string and string ID is transmitted to support multilingual keypads)

Affected Products: Russound CAM6.6 Controller

Running Change? N/A

Known Problems / Issues:

None

///////////////////////////////////////////////////////////////////////////////

Version: 1.00.00

Date (MM/DD/YYY): 6/25/2004

Software Developers: 
Bill Edmondson

Compiler: Raisonance RIDE IDE Version 06.10.10
          Build Number BN727-51XAST6
          8051 ToolChain 6.4.27
          XA ToolChain 2.5.26

Target:   Philips PXAG49

No of Builds: 1

Added / Deleted / Modified Features:
Initial Release

Bug Fixes:

N/A

Affected Products: Russound CAM6.6 Controller

Running Change? N/A

Known Problems / Issues:

None

