TVA2.1 Digital Two-Channel TV Amplifier with IR Learning and Sub Out

TVA2.1 Digital Two-Channel TV Amplifier with IR Learning and Sub Out

Category: Amplifiers - Legacy

Better Sound for TV! Control with your TV remote. The Russound TVA2.1 is a digital 2-channel low-profile amplifier designed expressly for integrating with flat panel televisions.
The TVA2.1 delivers smooth, robust sound for an enhanced viewing experience. On-board IR learning allows its volume to be seamlessly controlled by the TV or cable box’s remote control.

“The Russound [TVA2.1] is solidly built, it offers all of the features needed to power a pair of speakers, and it sounds clear and robust. Because of its size I was also able to neatly tuck the amp into a TV stand without it looking out of place”
_{– Robert Archer, CePro}

TVA2.1 awards

Overview

Its thin footprint means the TVA2.1 can be hidden behind the television or mounted in an in-wall panel behind a television for convenience. The built-in IR learning function eliminates the need for an external control system. This can dramatically reduce the cost of adding additional rooms of audio to a home and keeps the operation simple and intuitive for the homeowner by letting them use their current remote control device.

The TVA2.1 features three input options for flexibility. A traditional analog RCA line level input, and both Digital Coax and Optical S/PDIF. The TVA2.1 supports up to 24bit/96khz digital audio in a PCM stereo format.

Features

Class-D amplifier 2 x 30W RMS into 8ohm
24-bit/96kHz S-PDIF support
S-PDIF, Optical and Analog Line Level inputs
4-pole Speaker Detachable Screw connector and line level Subwoofer output
IR Learning for basic volume control. IR remote control support
Small Footprint with mounting options for discreet installation
External 24v Power Supply

Specifications

Shipping Dimensions:
11.6″ (W) x 5.0″ (H) x 7.5″ (D)
(29.5 x 12.7 x 19.1 cm)
Shipping Weight: 2.0 lbs (0.9 kg)
Amplified Channels: 2
Frequency Response: 40Hz to 20KHz +/- 1dB, 20Hz -3dB, Sub Out: -3dB at 170Hz
Input Impedance: 22K
Line Output: Subwoofer
Power Output: Continuous Stereo:
30 watts per channel at 8 ohms <1% THD+N
Power Requirement(s): 27 VDC 4.0A (External D235PS Power Supply)
Signal to Noise Ratio: >90dB 20Hz to 20KHz
Total Harmonic Distortion: 1% (1KHz @ 1W)